General information

Thank you for your interest in VEGA Hydraulic Cylinders! Below is a summary of all the important information for correct application.

Here you will find technical parameters such as thread types, screws and hose connection dimensions.

V215CR are unified according to ISO 6020-2. This type features a wide range of clamping types, which makes it suitable for a variety of applications.

IMPORTANT NOTE: For long strokes (above 80-100 mm) it is recommended to use End-Stroke Cushioning and venting. Please contact us for more details.

The End-Stroke Cushioning Technology makes it possible to achieve a significant reduction in cycle times thanks to faster movements.

V215CR hydraulic cylinders can be customized to any length, with no extra charge for stroke adjustments.

This type works best with strokes above 80 mm but shorter strokes are also possible.

Typical uses include longer side-action movements, ejection table movements and die casting applications. The cylinder is highly suitable for driving reciprocating motions as well as the movements of one-purpose machines.

To increase the load capacity in the locked position you can use the Lock ZR35AHt.

For easy sensor position adjustment you can use our controller ZD09##11#

Please check if your cylinder can be delivered together with hydraulic Fast Tie-In systems.

Congratulations on your choice of V215CR & wishing you long years of smooth production ahead.

All VEGA cylinders have lifetime support through our MachineLOG IT system.

Push and pull forces

8MPa/80bar/1160PSI		10MPa/100bar/1450PSI		12.5MPa/125bar/1812PSI		16MPa/160bar/2320PSI		20MPa/200bar/2320PSI
Th	Tr	Th	Tr	Th	Tr	Th	Tr	Th	Tr
393	302	491	378	613	472	785	604	982	755

Oil port

Rod end style Female metric thread